Flexible Ducting / Ventilation First Choice Globally of all industrial fabric welding. . .
Click here for how to contact us!Miller Weldmaster manufactures a variety of equipment for the production of ventilation tubes, ducting, and air stop curtains. Miller will design a completely automated machine to fit you specific production needs. Take a look at the equipment below and see how you can instantly increase your production while decreasing labor cost.
FX-100 Video
view larger photoVentilation Video
view larger photoInsulation Tape Video
view larger photoVentilation Video
view larger photo
| FX-50 Video view larger photo |
view larger photo |
|
|
|
 |
Systems for the production of ducting / ventilation tubes:
| FX-100 Ducting Machine The FX100 is specifically designed to weld Flexible reinforced ducting or tubing. This machine will weld reinforced tubes from a 2-inch diameter to a 48-inch diameter. The FX100 can also easily add a wear strip to the outside. All operations run simultaneous and are automated. |
| FX-50 Large Ducting Tube Machine The FX-50 is specifically designed to weld LARGE Flexible reinforced tubing. This machine will weld reinforcement to tubes from a 15-inch diameter to any diameter necessary. The FX-50 can also add a wear strip to the outside. |
| M-100 Ventilation Tubes A M-100 Multi-Sealer designed for manufacturing ventilation tubes will weld several panels together into a tube, create t-tape, weld the t-tape onto the large tube, grommet the t-tape and cut the entire welded tube to length simultaneously and fully automated. These systems are designed to greatly increase production while substantially reducing labor costs. |
| M-100 Insulated Tape This system welds two thermoplastic pieces of fabric together with a piece of insulation in between. This system consists of two unwind stands, an M-100 frame with two welding heads, and a rewind system. Both outside edges are welded with a fin or prayer seal simultaneously. |
| M-100 Ventilation Tubes A M-100 Multi-Sealer designed for manufacturing ventilation tubes will weld several panels together into a tube, create t-tape, weld the t-tape onto the large tube, grommet the t-tape and cut the entire welded tube to length simultaneously and fully automated. These systems are designed to greatly increase production while substantially reducing labor costs. |
| T-100 T-Tape System This system consists of a unwind stand, single headed T100 welder, grommet machine and a re-wind stand. This system unwinds, welds, grommets and rewind simultaneously. |
|
|
|
|
||||||||||||||||||||||||||||||||||||||||
)){kind=link}