Hot Air Welding, Hot Wedge Welding

T600 Shade

A Complete Shade and Awning Solution

Effortless operating welder for welding PVC or acrylic shades, awnings and structures with additional fabric handling support. Its heavy duty construction allows for the toughest jobs.
Best For:
  • Aerospace
  • Awnings
  • Blinds
  • Roller Doors
  • Marine
  • Shades/Tension Structure
  • Tarpaulins/Covers
Seam Type:
  • Hem Hem
  • Hem with Pocket Hem with Pocket
  • Hem with Rope Hem with Rope
  • Overlap Overlap
  • Extrusion Beading Extrusion Beading
Features & Options

Features & Benefits

  • Easy operation touch screen with recipe storage for quick setting recall
  • Equipped with dual arms for increased product versatility
  • Inboard and outboard fabric puller for easier fabric handling
  • Quick, repeatable head adjustments for precision welding
  • Available in hot wedge, hot air or equipped with both for optimal product production
  • Quick, easy guide change for multiple seam configurations

Technical Specs

Power Requirements

  • 208 - 240 Volts - Single Phase - 25 Amp.
  • 380 - 400 Volts - Single Phase -15 Amp.

Air Requirements

  • 2cfm @ 100psi

Power Consumption

  • Approx. 6kW

Maximum Temperature

  • Hot Air: 730˚C (1,346˚F)
  • Hot Wedge: 450˚C (842˚F)

 

Throat Width

  • 2.03m (79.9")

Dimensions

  • Width: 0.6m (23")
  • Length: 3m (120")
  • Height: 1.7m (67.5")

Weight

  • 680kg (1,500lb)

Seam Width

  • 10 - 50mm (0.5 - 2”)**

Welding Cycle

  • Up to 30m/min (100ft/min)*

* Depending on the application, the seam width and the type of material used
** Additional guides might be necessary
Our Training Process

Trust Miller Weldmaster to get your started!

STEP ONE

Schedule Your Training

A Miller Weldmaster certified field service engineer will contact you to schedule installation and training at your facility. 
STEP TWO

Installation Preparation

We provide you with everything you need to know to get your team ready for installation and training.
STEP THREE

Staff Training

Your staff will receive extensive instruction on welding equipment operation and maintenance and how to produce your product.

 

CONTACT US FOR TRAINING

Machine Videos

  • Overview & How Tos
  • Training Videos
Our Most Versatile Workhorse - T600
Versatile Large & Heavy Production Demands for PVC & More!
How to Make Custom Striped Awnings - T600 Extreme Shade I Miller Weldmaster
Hot Air Wedge Fabric Welding Machine | PVC, Awnings & Canopy
Hot Air, Wedge PVC Welding Machine | Shelters, Tents, Canopies
Acrylic Welding Set Up - T300 Extreme I Miller Weldmaster
Tech Tip I How to Set Up your Overlap Guide I T300 Extreme
Tech Tip I How to Change HMI & PLC Battery I T300 Extreme
Tech Tip I Start Weld Edge Fabric I T300 Extreme
Changing Heat Systems on T300 I Miller Weldmaster
Tech Tip I How to Properly Weld Acrylic Fabric with Hot Wedge Welding I T300 Extreme
Wedge Alignment
Tech Tip I How to Tighten your Weld Rollers I T300 Extreme
T-SERIES I How to Adjust your Hem Guide I Miller Weldmaster
How To Switch From a 1 Inch To A 2 Inch Weld Roller
How To Clean your Air Filters on the Compressors
Explaining the Upper Roller Speed

Service & Resolution Center

Our service team is dedicated to keeping our customer’s businesses running at optimal performance and assisting with any solutions you need. We are standing by to help you.

Contact Us Today!

Ready to get started or just have more questions for us? Simply fill out this form and we will be in touch with you shortly.