A complete, semi-automated solution for attaching spine to your blinds, shades and awnings. The T300 Extreme Spline System is built to move your spline at the precise speed needed to create the best looking flat seams. With speeds up to 15 feet per minute, the T300 Extreme Spline System will produce your blinds, shades and awnings fast and easy all day long. No seamstress skills needed, as the conveyor is automatically synced to the welder.
Best For:
Awnings
Blinds
Pergolas
Screens
Shades/Tension Structure
Shelters Structures
Seam Type:
Fin Prayer Seam
Hem
Hem with Pocket
Hem with Rope
Extrusion Beading
Webbing - SEG
Features & Options
Features & Benefits
Quick setting recall with easy operation touch screen and recipe storage
Automated Conveyor fee for reduction of wrinkles and easy of use
Hot rotary welding technology to significantly increase production
Automated spline pay off for less material handling
Quick, repeatable head adjustments for precision welding
Multiple seam configurations for quick, easy guide change
Technical Specs
Power Requirements
208 - 240 Volts - Single Phase - 25 Amp.
380 - 400 Volts - Single Phase -15 Amp.
Air Requirements
2cfm @ 100psi
Power Consumption
Approx. 6kw
Maximum Temperature
Hot Air: 730° C (1,346˚F)
Hot Wedge: 450° C (842˚F)
Throat Width
1m (39")
Dimensions
Width: 0.6m (23")
Length: 7.6m (300")
Height: 1.5m (59")
Weight
231kg (509lb) - T300 Only
Seam Width
10 - 50m (0.5 - 2”)**
Welding Cycle
Up to 30m/min (100ft/min)*
* Depending on the application, the seam width and the type of material used **Additional guides might be necessary
A Miller Weldmaster certified field service engineer will contact you to schedule installation and training at your facility.
STEP TWO
Installation Preparation
We provide you with everything you need to know to get your team ready for installation and training.
STEP THREE
Staff Training
Your staff will receive extensive instruction on welding equipment operation and maintenance and how to produce your product.
Machine Videos
Overview & How Tos
Training Videos
How to Apply Spline to your Blinds and Shades - T300 Extreme Spline System
Hot Air Welder with Synchronized Conveyor for Reinforced Blinds and Screens
Tech Tip I How to Change HMI & PLC Battery I T300 Extreme
Wedge Alignment I Miller Weldmaster
Tech Tip I Start Weld Edge Fabric I T300 Extreme
T-SERIES I How to Adjust your Hem Guide I Miller Weldmaster
Tech Tip I How to Tighten your Weld Rollers I T300 Extreme
Changing Heat Systems on T300 I Miller Weldmaster
How To Clean your Air Filters on the Compressors
Explaining the Upper Roller Speed
Service & Resolution Center
Our service team is dedicated to keeping our customer’s businesses running at optimal performance and assisting with any solutions you need. We are standing by to help you.